dmesg - 2 x Intel Xeon E5-2665 0
Linux version 5.15.143-1-pve (build@proxmox) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PVE 5.15.143-1 (2024-02-08T18:12Z) ()
Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.143-1-pve root=/dev/mapper/pve-root ro quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bddabfff] usable
BIOS-e820: [mem 0x00000000bddac000-0x00000000bddddfff] ACPI data
BIOS-e820: [mem 0x00000000bddde000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000203fffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: HP ProLiant DL380p Gen8, BIOS P70 05/24/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.829 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x203ffff max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xbddac max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f]
Using GB pages for direct mapping
RAMDISK: [mem 0x30a35000-0x34511fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000BDDAED00 0000E4 (v01 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: FACP 0x00000000BDDAEE40 0000F4 (v03 HP ProLiant 00000002 \xd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20210730/tbfadt-669)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20210730/tbfadt-669)
ACPI: DSDT 0x00000000BDDAEF40 0026DC (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000BDDAC140 000040
ACPI: FACS 0x00000000BDDAC140 000040
ACPI: SPCR 0x00000000BDDAC180 000050 (v01 HP SPCRRBSU 00000001 \xd2? 0000162E)
ACPI: MCFG 0x00000000BDDAC200 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000BDDAC240 000038 (v01 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDAC280 000064 (v02 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: SPMI 0x00000000BDDAC300 000040 (v05 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: ERST 0x00000000BDDAC340 000230 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: APIC 0x00000000BDDAC580 00026A (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 0x00000000BDDAC800 000750 (v01 HP Proliant 00000001 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDACF80 000176 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: BERT 0x00000000BDDAD100 000030 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: HEST 0x00000000BDDAD140 0000BC (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: DMAR 0x00000000BDDAD200 0004E0 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDAEC40 000030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 0x00000000BDDAEC80 00006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 0x00000000BDDB1640 0007EA (v01 HP DEV_PCI1 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB1E40 000103 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0x00000000BDDB1F80 000098 (v03 HP CRSPCI1 00000002 HP 00000001)
ACPI: SSDT 0x00000000BDDB2040 00038A (v02 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 0x00000000BDDB2400 000536 (v03 HP riser1a 00000002 INTL 20030228)
ACPI: SSDT 0x00000000BDDB2940 000BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB3500 000377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB3880 005524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB8DC0 004E84 (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Reserving FACP table memory at [mem 0xbddaee40-0xbddaef33]
ACPI: Reserving DSDT table memory at [mem 0xbddaef40-0xbddb161b]
ACPI: Reserving FACS table memory at [mem 0xbddac140-0xbddac17f]
ACPI: Reserving FACS table memory at [mem 0xbddac140-0xbddac17f]
ACPI: Reserving SPCR table memory at [mem 0xbddac180-0xbddac1cf]
ACPI: Reserving MCFG table memory at [mem 0xbddac200-0xbddac23b]
ACPI: Reserving HPET table memory at [mem 0xbddac240-0xbddac277]
ACPI: Reserving FFFF table memory at [mem 0xbddac280-0xbddac2e3]
ACPI: Reserving SPMI table memory at [mem 0xbddac300-0xbddac33f]
ACPI: Reserving ERST table memory at [mem 0xbddac340-0xbddac56f]
ACPI: Reserving APIC table memory at [mem 0xbddac580-0xbddac7e9]
ACPI: Reserving SRAT table memory at [mem 0xbddac800-0xbddacf4f]
ACPI: Reserving FFFF table memory at [mem 0xbddacf80-0xbddad0f5]
ACPI: Reserving BERT table memory at [mem 0xbddad100-0xbddad12f]
ACPI: Reserving HEST table memory at [mem 0xbddad140-0xbddad1fb]
ACPI: Reserving DMAR table memory at [mem 0xbddad200-0xbddad6df]
ACPI: Reserving FFFF table memory at [mem 0xbddaec40-0xbddaec6f]
ACPI: Reserving PCCT table memory at [mem 0xbddaec80-0xbddaeced]
ACPI: Reserving SSDT table memory at [mem 0xbddb1640-0xbddb1e29]
ACPI: Reserving SSDT table memory at [mem 0xbddb1e40-0xbddb1f42]
ACPI: Reserving SSDT table memory at [mem 0xbddb1f80-0xbddb2017]
ACPI: Reserving SSDT table memory at [mem 0xbddb2040-0xbddb23c9]
ACPI: Reserving SSDT table memory at [mem 0xbddb2400-0xbddb2935]
ACPI: Reserving SSDT table memory at [mem 0xbddb2940-0xbddb34f8]
ACPI: Reserving SSDT table memory at [mem 0xbddb3500-0xbddb3876]
ACPI: Reserving SSDT table memory at [mem 0xbddb3880-0xbddb8da3]
ACPI: Reserving SSDT table memory at [mem 0xbddb8dc0-0xbddbdc43]
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: PXM 1 -> APIC 0x2c -> Node 1
SRAT: PXM 1 -> APIC 0x2d -> Node 1
SRAT: PXM 1 -> APIC 0x2e -> Node 1
SRAT: PXM 1 -> APIC 0x2f -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x103fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x1040000000-0x203fffffff]
NODE_DATA(0) allocated [mem 0x103ffd6000-0x103fffffff]
NODE_DATA(1) allocated [mem 0x203ffd5000-0x203fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000203fffefff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000bddabfff]
node 0: [mem 0x0000000100000000-0x000000103fffffff]
node 1: [mem 0x0000001040000000-0x000000203fffefff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000103fffffff]
Initmem setup node 1 [mem 0x0000001040000000-0x000000203fffefff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 100 pages in unavailable ranges
On node 0, zone Normal: 8788 pages in unavailable ranges
On node 1, zone Normal: 1 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x908
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
ACPI: SPCR: console: uart,mmio,0x0,9600
TSC deadline timer available
smpboot: Allowing 64 CPUs, 32 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xbddac000-0xbddddfff]
PM: hibernation: Registered nosave memory: [mem 0xbddde000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 16 17 18 19 20 21 22 23
pcpu-alloc: [0] 32 34 36 38 40 42 44 46 [0] 48 50 52 54 56 58 60 62
pcpu-alloc: [1] 08 09 10 11 12 13 14 15 [1] 24 25 26 27 28 29 30 31
pcpu-alloc: [1] 33 35 37 39 41 43 45 47 [1] 49 51 53 55 57 59 61 63
Built 2 zonelists, mobility grouping on. Total pages: 33021236
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.143-1-pve root=/dev/mapper/pve-root ro quiet
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.15.143-1-pve", will be passed to user space.
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 258048 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 524288 bytes
printk: early log buf free: 249576(95%)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 131881228K/134182168K available (16393K kernel code, 4354K rwdata, 10272K rodata, 3308K init, 18800K bss, 2300680K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 48404 entries in 190 pages
ftrace: allocated 190 pages with 6 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
NR_IRQS: 524544, nr_irqs: 1752, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20210730
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbefe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbefe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000f4ffe000 flags: 0x1
DMAR: dmar1: reg_base_addr f4ffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
DMAR: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
DMAR: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
DMAR: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
DMAR: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000000e8000-0x00000000000e8fff], contact BIOS vendor for fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000000e8000-0x00000000000e8fff]
BIOS vendor: HP; Ver: P70; Product Version:
DMAR: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 10 under DRHD base 0xfbefe000 IOMMU 0
DMAR-IR: IOAPIC id 8 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: IOAPIC id 0 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xf4ffe000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2281723a645, max_idle_ns: 440795325635 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.65 BogoMIPS (lpj=9575316)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Freeing SMP alternatives memory: 44K
pid_max: default: 65536 minimum: 512
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1280
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2665 0 @ 2.40GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
signal: max sigframe size: 1776
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
.... node #1, CPUs: #8
smpboot: CPU 8 Converting physical 0 to logical die 1
#9 #10 #11 #12 #13 #14 #15
.... node #0, CPUs: #16
MDS CPU bug present and SMT on, data leak possible. See for more details.
#17 #18 #19 #20 #21 #22 #23
.... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
smp: Brought up 2 nodes, 32 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 32 processors activated (153422.33 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:42:29, date: 2024-03-12
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1710276149.292:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL380 detected, enabling pci=bfsort.
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: _OSC: platform willing to grant []
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [bus 00-1f]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: [8086:3c05] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [8086:3c07] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: [8086:3c09] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: [8086:3c0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xf6cf0000-0xf6cf3fff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xf6ce0000-0xf6ce3fff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xf6cd0000-0xf6cd3fff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xf6cc0000-0xf6cc3fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xf6cb0000-0xf6cb3fff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xf6ca0000-0xf6ca3fff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xf6c90000-0xf6c93fff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xf6c80000-0xf6c83fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf6c70000-0xf6c70fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6c60000-0xf6c603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6c50000-0xf6c503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x4000-0x4007]
pci 0000:00:1f.2: reg 0x14: [io 0x4008-0x400b]
pci 0000:00:1f.2: reg 0x18: [io 0x4010-0x4017]
pci 0000:00:1f.2: reg 0x1c: [io 0x4018-0x401b]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x402f]
pci 0000:00:1f.2: reg 0x24: [io 0x4030-0x403f]
pci 0000:00:01.0: PCI bridge to [bus 07]
pci 0000:00:01.1: PCI bridge to [bus 13]
pci 0000:03:00.0: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf6be0000-0xf6beffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf6bd0000-0xf6bdffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf6bc0000-0xf6bcffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xf6bb0000-0xf6bbffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xf6ba0000-0xf6baffff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [mem 0xf6b90000-0xf6b9ffff 64bit pref]
pci 0000:03:00.2: reg 0x18: [mem 0xf6b80000-0xf6b8ffff 64bit pref]
pci 0000:03:00.2: reg 0x20: [mem 0xf6b70000-0xf6b7ffff 64bit pref]
pci 0000:03:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.3: reg 0x10: [mem 0xf6b60000-0xf6b6ffff 64bit pref]
pci 0000:03:00.3: reg 0x18: [mem 0xf6b50000-0xf6b5ffff 64bit pref]
pci 0000:03:00.3: reg 0x20: [mem 0xf6b40000-0xf6b4ffff 64bit pref]
pci 0000:03:00.3: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 14]
pci 0000:02:00.0: [103c:323b] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [mem 0xf7f00000-0xf7ffffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xf7ef0000-0xf7ef03ff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0x5000-0x50ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:02.3: PCI bridge to [bus 15]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.1: PCI bridge to [bus 16]
pci 0000:00:03.2: PCI bridge to [bus 17]
pci 0000:00:03.3: PCI bridge to [bus 18]
pci 0000:00:11.0: PCI bridge to [bus 1a]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x14: [mem 0xf7df0000-0xf7df01ff]
pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0xf5000000-0xf5ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xf7de0000-0xf7de3fff]
pci 0000:01:00.1: reg 0x18: [mem 0xf7000000-0xf77fffff]
pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 0x14: [mem 0xf6ff0000-0xf6ff00ff]
pci 0000:01:00.2: reg 0x18: [mem 0xf6e00000-0xf6efffff]
pci 0000:01:00.2: reg 0x1c: [mem 0xf6d80000-0xf6dfffff]
pci 0000:01:00.2: reg 0x20: [mem 0xf6d70000-0xf6d77fff]
pci 0000:01:00.2: reg 0x24: [mem 0xf6d60000-0xf6d67fff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:19: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 19] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 5
ACPI: PCI: Interrupt link LNKB configured for IRQ 7
ACPI: PCI: Interrupt link LNKC configured for IRQ 10
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 5
ACPI: PCI: Interrupt link LNKF configured for IRQ 7
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:01: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:01: _OSC: platform willing to grant []
acpi PNP0A08:01: _OSC: platform retains control of PCIe features (AE_SUPPORT)
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:20: root bus resource [io 0x8000-0xffff window]
pci_bus 0000:20: root bus resource [bus 20-3f]
pci 0000:20:00.0: [8086:3c01] type 01 class 0x060400
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:20:01.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
pci 0000:20:02.1: [8086:3c05] type 01 class 0x060400
pci 0000:20:02.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:20:02.2: PME# supported from D0 D3hot D3cold
pci 0000:20:02.3: [8086:3c07] type 01 class 0x060400
pci 0000:20:02.3: PME# supported from D0 D3hot D3cold
pci 0000:20:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:20:03.0: enabling Extended Tags
pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
pci 0000:20:03.1: [8086:3c09] type 01 class 0x060400
pci 0000:20:03.1: PME# supported from D0 D3hot D3cold
pci 0000:20:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:20:03.2: PME# supported from D0 D3hot D3cold
pci 0000:20:03.3: [8086:3c0b] type 01 class 0x060400
pci 0000:20:03.3: PME# supported from D0 D3hot D3cold
pci 0000:20:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:20:04.0: reg 0x10: [mem 0xfbff0000-0xfbff3fff 64bit]
pci 0000:20:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:20:04.1: reg 0x10: [mem 0xfbfe0000-0xfbfe3fff 64bit]
pci 0000:20:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:20:04.2: reg 0x10: [mem 0xfbfd0000-0xfbfd3fff 64bit]
pci 0000:20:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:20:04.3: reg 0x10: [mem 0xfbfc0000-0xfbfc3fff 64bit]
pci 0000:20:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:20:04.4: reg 0x10: [mem 0xfbfb0000-0xfbfb3fff 64bit]
pci 0000:20:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:20:04.5: reg 0x10: [mem 0xfbfa0000-0xfbfa3fff 64bit]
pci 0000:20:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:20:04.6: reg 0x10: [mem 0xfbf90000-0xfbf93fff 64bit]
pci 0000:20:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:20:04.7: reg 0x10: [mem 0xfbf80000-0xfbf83fff 64bit]
pci 0000:20:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:20:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:20:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:20:05.4: reg 0x10: [mem 0xfbf70000-0xfbf70fff]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 24]
pci 0000:20:01.1: PCI bridge to [bus 25]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 26]
pci 0000:20:02.2: PCI bridge to [bus 22]
pci 0000:20:02.3: PCI bridge to [bus 27]
pci 0000:20:03.0: PCI bridge to [bus 21]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: on NUMA node 1
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.1: vgaarb: setting as boot VGA device
pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.1: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 1f
PCI: root bus 1f: using default resources
PCI: Probing PCI hardware (bus 1f)
PCI host bridge to bus 0000:1f
pci_bus 0000:1f: Unknown NUMA node; performance will be reduced
pci_bus 0000:1f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:1f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:1f: No busn resource found for root bus, will use [bus 1f-ff]
pci_bus 0000:1f: busn_res: can not insert [bus 1f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
pci 0000:1f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:1f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:1f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:1f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:1f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:1f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:1f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:1f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:1f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:1f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:1f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:1f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:1f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:1f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:1f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:1f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:1f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:1f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:1f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:1f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:1f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:1f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:1f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:1f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:1f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:1f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:1f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:1f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:1f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:1f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:1f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:1f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:1f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:1f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:1f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:1f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:1f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:1f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:1f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:1f: busn_res: [bus 1f-ff] end is updated to 1f
pci_bus 0000:1f: busn_res: can not insert [bus 1f] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: Unknown NUMA node; performance will be reduced
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
pci 0000:3f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:3f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:3f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:3f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:3f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:3f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:3f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:3f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:3f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:3f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:3f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:3f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:3f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:3f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:3f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:3f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbddac000-0xbfffffff]
e820: reserve RAM buffer [mem 0x203ffff000-0x203fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf4ffe000-0xf4ffffff] could not be reserved
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0310-0x0315] has been reserved
system 00:01: [io 0x0316-0x0317] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0cd0-0x0cd3] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:06: [mem 0xfbefe000-0xfbefffff] could not be reserved
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, vmalloc)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.0: BAR 14: assigned [mem 0xf4000000-0xf40fffff]
pci 0000:00:01.0: PCI bridge to [bus 07]
pci 0000:00:01.1: PCI bridge to [bus 13]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf4000000-0xf403ffff pref]
pci 0000:03:00.2: BAR 6: assigned [mem 0xf4040000-0xf407ffff pref]
pci 0000:03:00.3: BAR 6: assigned [mem 0xf4080000-0xf40bffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xf40c0000-0xf40dffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 14]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf7e00000-0xf7e7ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7e00000-0xf7ffffff]
pci 0000:00:02.3: PCI bridge to [bus 15]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.1: PCI bridge to [bus 16]
pci 0000:00:03.2: PCI bridge to [bus 17]
pci 0000:00:03.3: PCI bridge to [bus 18]
pci 0000:00:11.0: PCI bridge to [bus 1a]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.2: BAR 6: assigned [mem 0xf6d00000-0xf6d0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 19]
pci_bus 0000:00: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:00: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:03: resource 2 [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf6d00000-0xf7dfffff]
pci_bus 0000:01: resource 2 [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:19: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:19: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:19: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:19: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:19: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:19: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:19: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:19: resource 11 [mem 0x000a0000-0x000bffff window]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 24]
pci 0000:20:01.1: PCI bridge to [bus 25]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 26]
pci 0000:20:02.2: PCI bridge to [bus 22]
pci 0000:20:02.3: PCI bridge to [bus 27]
pci 0000:20:03.0: PCI bridge to [bus 21]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: resource 4 [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:20: resource 5 [io 0x8000-0xffff window]
pci_bus 0000:1f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:1f: resource 5 [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 19904 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19486 usecs
pci 0000:20:05.0: disabled boot interrupts on device [8086:3c28]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b9dac000-0x00000000bddac000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.34)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_PR_.CP00: Found 2 idle states
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x4000 ctl 0x4008 bmdma 0x4020 irq 17
ata2: SATA max UDMA/133 cmd 0x4010 ctl 0x4018 bmdma 0x4028 irq 17
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2024-03-12T20:42:30 UTC (1710276150)
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
tsc: Refined TSC clocksource calibration: 2393.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
clocksource: Switched to clocksource tsc
Freeing initrd memory: 60276K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Bridge firewalling registered
Key type dns_resolver registered
microcode: sig=0x206d7, pf=0x1, revision=0x718
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2556004034, 5966010)->(2613572720, -51602676)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: c320a2fe500755084b7e046fb6bc955169e346ee'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 0:689:750
ata_link link1: hash matches
link1: hash matches
tty ttyS1: hash matches
RAS: Correctable Errors collector initialized.
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 0)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 3308K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 2016K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-5.15.143-1-pve
HP HPSA Driver (v 3.4.20-200)
hpsa 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
hpsa 0000:02:00.0: Logical aborts not supported
hpsa 0000:02:00.0: HP SSD Smart Path aborts not supported
ehci-pci 0000:00:1a.0: EHCI Host Controller
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 21, io mem 0xf6c60000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.143-1-pve ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:01:00.4: detected 8 ports
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 107, io base 0x00003c00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.143-1-pve uhci_hcd
usb usb2: SerialNumber: 0000:01:00.4
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 20, io mem 0xf6c50000
tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address ac:16:2d:75:42:50
tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 5.15.143-1-pve ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address ac:16:2d:75:42:51
tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
scsi host2: hpsa
hpsa can't handle SMP requests
hpsa 0000:02:00.0: scsi 2:0:0:0: added RAID HP P420i controller SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 2:0:1:0: masked Direct-Access HP EG1200JEZZZ PHYS DRV SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 2:0:2:0: masked Enclosure PMCSIERA SRCv8x6G enclosure SSDSmartPathCap- En- Exp=0
hpsa 0000:02:00.0: scsi 2:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap- En- Exp=1
hpsa can't handle SMP requests
scsi 2:0:0:0: RAID HP P420i 8.32 PQ: 0 ANSI: 5
scsi 2:1:0:0: Direct-Access HP LOGICAL VOLUME 8.32 PQ: 0 ANSI: 5
scsi 2:0:0:0: Attached scsi generic sg0 type 12
sd 2:1:0:0: Attached scsi generic sg1 type 0
sd 2:1:0:0: [sda] 2344160432 512-byte logical blocks: (1.20 TB/1.09 TiB)
sd 2:1:0:0: [sda] Write Protect is off
sd 2:1:0:0: [sda] Mode Sense: 73 00 00 08
sd 2:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:1:0:0: [sda] Optimal transfer size 262144 bytes
tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address ac:16:2d:75:42:52
tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
sda: sda1 sda2 sda3
sd 2:1:0:0: [sda] Attached SCSI disk
tg3 0000:03:00.3 eth3: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address ac:16:2d:75:42:53
tg3 0000:03:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.3 eno4: renamed from eth3
tg3 0000:03:00.0 eno1: renamed from eth0
tg3 0000:03:00.1 eno2: renamed from eth1
tg3 0000:03:00.2 eno3: renamed from eth2
usb 1-1: new high-speed USB device number 2 using ehci-pci
random: lvm: uninitialized urandom read (4 bytes read)
usb 3-1: new high-speed USB device number 2 using ehci-pci
random: lvm: uninitialized urandom read (2 bytes read)
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
usb 1-1.6: new high-speed USB device number 3 using ehci-pci
usb 3-1.3: new high-speed USB device number 3 using ehci-pci
usb 3-1.3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01
usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1.3:1.0: USB hub found
hub 3-1.3:1.0: 2 ports detected
usb 1-1.6: New USB device found, idVendor=6557, idProduct=0031, bcdDevice= 1.10
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: USB DISK 3.0
usb 1-1.6: Manufacturer:
usb 1-1.6: SerialNumber: 07182AF236F44E60
usb-storage 1-1.6:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-1.6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 60628992 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI removable disk
random: crng init done
device-mapper: thin: Data device (dm-3) discard unsupported: Disabling discard passdown.
raid6: sse2x4 gen() 5227 MB/s
raid6: sse2x4 xor() 3047 MB/s
raid6: sse2x2 gen() 8529 MB/s
raid6: sse2x2 xor() 6410 MB/s
raid6: sse2x1 gen() 9084 MB/s
raid6: sse2x1 xor() 5736 MB/s
raid6: using algorithm sse2x1 gen() 9084 MB/s
raid6: .... xor() 5736 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 247.3-7+1-pmx11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Created slice system-systemd\x2djournald.slice.
systemd[1]: Created slice system-systemd\x2djournald\x2dvarlink.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target ceph target allowing to start/stop all [email protected] instances at once.
systemd[1]: Reached target ceph target allowing to start/stop all ceph*@.service instances at once.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Slices.
systemd[1]: Reached target System Time Set.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Journal Service...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: [email protected]: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
systemd[1]: Started Device-mapper event daemon.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
iscsi: registered transport (iser)
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Rule-based Manager for Device Events and Files...
spl: loading out-of-tree module taints kernel.
systemd[1]: Started Journal Service.
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
systemd-journald[1076]: Received client request to flush runtime journal.
ZFS: Loaded module v2.1.14-pve1, ZFS pool version 5000, ZFS filesystem version 5
dca service started, version 1.12.1
IPMI message handler: version 39.2
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
input: PC Speaker as /devices/platform/pcspkr/input/input4
ioatdma: Intel(R) QuickData Technology Driver 5.00
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
mgag200 0000:01:00.1: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
[drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0
fbcon: mgag200drmfb (fb0) is primary device
mgag200 0000:01:00.1: [drm] drm_plane_enable_fb_damage_clips() not called
Console: switching to colour frame buffer device 128x48
mgag200 0000:01:00.1: [drm] fb0: mgag200drmfb frame buffer device
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:1f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Sandy Bridge SrcID#1_Ha#0: DEV 0000:3f:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
Adding 8388604k swap on /dev/mapper/pve-swap. Priority:-2 extents:1 across:8388604k FS
audit: type=1400 audit(1710276227.372:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1581 comm="apparmor_parser"
audit: type=1400 audit(1710276227.408:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1583 comm="apparmor_parser"
audit: type=1400 audit(1710276227.408:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1583 comm="apparmor_parser"
audit: type=1400 audit(1710276227.420:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="swtpm" pid=1577 comm="apparmor_parser"
audit: type=1400 audit(1710276227.424:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1580 comm="apparmor_parser"
audit: type=1400 audit(1710276227.424:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1579 comm="apparmor_parser"
audit: type=1400 audit(1710276227.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1579 comm="apparmor_parser"
audit: type=1400 audit(1710276227.424:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1579 comm="apparmor_parser"
audit: type=1400 audit(1710276227.480:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/chronyd" pid=1578 comm="apparmor_parser"
audit: type=1400 audit(1710276227.488:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=1582 comm="apparmor_parser"
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
softdog: soft_reboot_cmd= soft_active_on_boot=0
vmbr0: port 1(eno2) entered blocking state
vmbr0: port 1(eno2) entered disabled state
device eno2 entered promiscuous mode
tg3 0000:03:00.1 eno2: Link is up at 100 Mbps, full duplex
tg3 0000:03:00.1 eno2: Flow control is off for TX and off for RX
tg3 0000:03:00.1 eno2: EEE is disabled
vmbr0: port 1(eno2) entered blocking state
vmbr0: port 1(eno2) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vmbr0: link becomes ready
sctp: Hash tables configured (bind 2048/2048)
------------[ cut here ]------------
trc_wait_for_one_reader(): smp_call_function_single() failed for CPU: 32
WARNING: CPU: 0 PID: 13 at kernel/rcu/tasks.h:1044 trc_wait_for_one_reader.part.0+0x286/0x2d0
Modules linked in: sctp ip6_udp_tunnel udp_tunnel nf_tables bonding tls softdog nfnetlink_log nfnetlink intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqbypass crct10dif_pclmul drm_kms_helper ipmi_ssif ghash_clmulni_intel sha256_ssse3 cec sha1_ssse3 aesni_intel rc_core crypto_simd cryptd i2c_algo_bit fb_sys_fops syscopyarea sysfillrect hpilo sysimgblt serio_raw acpi_power_meter rapl ioatdma pcspkr acpi_ipmi intel_cstate ipmi_si mac_hid ipmi_devintf ipmi_msghandler dca zfs(PO) zunicode(PO) zzstd(O) zlua(O) zavl(PO) icp(PO) zcommon(PO) znvpair(PO) spl(O) vhost_net vhost vhost_iotlb tap ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi drm sunrpc ip_tables x_tables autofs4 btrfs blake2b_generic xor zstd_compress raid6_pq simplefb uas usb_storage dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c crc32_pclmul psmouse lpc_ich pata_acpi uhci_hcd ehci_pci ehci_hcd
hpsa scsi_transport_sas tg3
CPU: 0 PID: 13 Comm: rcu_tasks_trace Tainted: P IO 5.15.143-1-pve #1
Hardware name: HP ProLiant DL380p Gen8, BIOS P70 05/24/2019
RIP: 0010:trc_wait_for_one_reader.part.0+0x286/0x2d0
Code: 00 00 00 4c 89 ef e8 d9 77 4f 00 eb b1 44 89 fa 48 c7 c6 c0 80 02 94 48 c7 c7 d0 e5 3c 94 c6 05 41 3f 09 02 01 e8 7c 93 b9 00 0b e9 08 ff ff ff 4c 89 ee 48 c7 c7 c0 de d7 94 e8 e4 6b 53 00
RSP: 0018:ffffbaacc62cfdf8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9ec1bf620588
RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9ec1bf620580
RBP: ffffbaacc62cfe20 R08: 0000000000000003 R09: 0000000000000001
R10: ffff9ed1fff5a870 R11: 0000000000000001 R12: ffff9eb2c3db1980
R13: 0000000000000020 R14: 00000000000205a4 R15: 0000000000000020
FS: 0000000000000000(0000) GS:ffff9ec1bf600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1cd1359e84 CR3: 0000001b5f010002 CR4: 00000000000606f0
Call Trace:
? show_regs.cold+0x1a/0x1f
? trc_wait_for_one_reader.part.0+0x286/0x2d0
? __warn+0x8c/0x100
? trc_wait_for_one_reader.part.0+0x286/0x2d0
? report_bug+0xa4/0xd0
? handle_bug+0x39/0x90
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? trc_wait_for_one_reader.part.0+0x286/0x2d0
? trc_wait_for_one_reader.part.0+0x286/0x2d0
rcu_tasks_trace_postscan+0x7a/0xb0
rcu_tasks_wait_gp+0x108/0x210
rcu_tasks_kthread+0x10f/0x1c0
? wait_woken+0x70/0x70
? rcu_tasks_trace_empty_fn+0x10/0x10
kthread+0x12a/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
---[ end trace 2b9ccbd61f825bb2 ]---
bpfilter: Loaded bpfilter_umh pid 2966
Started bpfilter
wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved.
L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and for details.
show_signal_msg: 9 callbacks suppressed
ebpf.plugin[2754]: segfault at ffffffffffffffff ip 00000000004641fd sp 00007fffccde3a70 error 5 in ebpf.plugin[401000+18e000]
Code: fa 55 89 f6 53 48 83 ec 38 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 48 89 e2 e8 bc 7c 0f 00 48 89 c5 48 83 f8 ff 74 4b 8b 5d 00 48 85 db 75 23 48 8b 3d 63 18 2a 00 e8 7e 34 06 00 66
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3206 > 3132), lowering kernel.perf_event_max_sample_rate to 62250